Does this look like it is healing properly
So Saturday morning I got a Haworth magnet put in and to close it up I used a steri strip with a little antibiotic cream then put a bandaid over that to keep it dry and to keep contaminants off of it. I was wondering if based on this picture it looks as if it is healing correctly.
Comments
https://imgur.com/a/7ZuawmA
I have a flexDF which is giant, and when he installed it, it like barely bled and I constantly put isopropyl alcohol on it so I had trouble getting it to close back up and was super paranoid and left my stitches in forever. Yours looks like its healing great haha. If you've been rubbing it on a new york city sidewalk, put some isopropyl alcohol on it. It causes it to heal slower because it kills good bacteria as well as bad but put it on and let it evaporate if you need it. other than that, maybe let it air out a little, but moisture is good. put some Neosporin on it and keep it covered. that should keep it moisturized and keep it from drying up and coming open. swap your bandage once a day, maybe twice if you're tweaking out, but your chances of it getting infected are really low now that it's over with and installed. It looks ideal.
what are you basing "moisture is good" on?
oops lol well listen to Cassox maybe that's why mine took forever lmao
So as a follow up question, it looks to have healed properly but I can feel it under the skin and it looks as if I can possibly see it a little bit through the skin. Is it too shallow and given this does it appear to be at risk for rejection. http://imgur.com/a/opMF6T5
Here is an album http://imgur.com/a/k9A8bYp
@Cassox I am not sure if the pictures are high enough quality if they aren't I will dig out my dslr.
@cassox so one last question sorry to bother you so much. In the case that it was too shallow, when would know if it is going to reject. I am a week and a half in and it seems like it is too shallow but I don't really have a reference to base it on. At the one month mark should it be safe to assume that unless the coating fails that it should not be coming out without external intervention. Sorry for all the questions I just am nervous that it is not deep enough and this is the only chance that I have to do this for the foreseeable future due to work.
A friend did it. In the case that it is going to come out how long will it take for it to become obvious.
@Cassox So I just went to close my laptop and my I made the mistake of putting my finger with the magnet too close to the magnet on the lid of the laptop. When my finger got close the magnet in my finger completely turned under the skin. This seems like it is probably really bad any feedback is greatly appreciated. Did I just fuckup the new nerves that are growing?