kuroro86

About

Username
kuroro86
Joined
Visits
3,213
Last Active
Roles
Member
Points
82
Badges
12

Comments

  • The biggest problem is people can't keep caring for an aging forum that is barely used for free. Security and up keep are not time or effort free. This is pushing to free alternatives, like Slack and discord. If you believe that "a open source forum like phpBB" you can take write the project in detail and look for people…
  • What type of motors or vibratos do you want to use? If you want you can test using the vibrators on the skin before putting them in. Weight and how much force they generate will be fundamental to decide where to put them. And if they have to vibrate for long time over 30 seconds temperature will have to be considered.
    in Digi Sense Comment by kuroro86 July 2023
  • Is not that strange, consider tDCS works by stimulating the brain with electro magnetic stimulations. With full magnet I would worry of the reaction of the brain in time. Usually tDCS stimulations is done max for 2 hours or most much less. Plus the brain tents to build resistance to changes in the long term. And requires…
  • I would suggest the Discord of Dangerous things. I can send link to introduction in DM. Well you could also Start the project here and see who pitches in.
  • It will be hard to find something for EU, due to very high regulations. Did you check it is legal for you to import it? Odin is a small company, you can try contacting them and tell them your problem. They could ship with a cheaper version, very likely without insurance. Can you post the kit you are looking for? I can post…
  • "The tool you use to see what is going on in your body . . . " -- Can you elaborate on this? What exact tool are you referring too? The tools, or medical instrument, use electromagnetic fields or sounds too tell you where the nanotech is ( is still in the stomach ? move to the intestine? etc... ). Example the…
  • The papier you shared is only a summary of nanotechnology that can be used for gene therapy, the one explaining the quantum dots are: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6642839/ (this seams to have a simple explanation) https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5546783/ The new ones:…
  • The link to the article is dead.
  • That sounds incredible over complicated. If memory doesn't cheat me the guiding was far more complicated than expected. The tool you use to see what is going on in your body is going to interfere with the guidance system the nanobots have. I didn't look into genetic modification too much, but do you really need to modify…
  • @glims making a company and make sure it fits regulations is a lot depending on location. Having more info on where and how to make a company would be good. ( found out you answered this question in this other post : https://forum.biohack.me/index.php?p=/discussion/2967/where-can-i-get-dn
  • For setting up a company , you can do that in Delaware USA. Possible other states that are very light on regulations. You can try Odin: https://www.the-odin.com/how-to-get-started/ Or you can contact privately Though Emporium and ask them directly.
  • The rfid implant is a simple rfid tag that can exchange data with a reader through radio frequency, and That is all the tech. As for uses you can use it in same places as a credit card , depends on the bank. Or as a proximity sensor, you get close to the lock of your home it will let you in, and maybe welcome you by name.…
  • Happy to see someone else in VR like me. There is a real problem with dump electrodes, you need to guide electricity to the skin and not let it go parallel to the skin. Bu the main reason you won't find a open source to tesla suit or a competitor is simply that the full body haptic is very vary small niche. But your main…
  • We are going to give more information on Grindfest 2023 after the 10 of December. Stay tuned
  • ok , but than what you need the tDCS for ? If you intend to stimulate the neck you are looking for a Galvanic stimulator for the skin. If you are looking for the person to learn to recognize pattern from the other brain, you can send the information to a vibration motor ( the one y find in videogame controllers on the…
  • Hi, this looks a really interesting project. But I'm confused by the post could you write a bit more details ? What EEG components are you using ? how many sensors ? what position on the head ? What software are you using to read the EEG ? Or not having a open source version is part of problem? there are same tDCS units…
  • @Satur9 Could you share publicly the documents ? Thank you
  • Simply silencing or removing a gene is not a possible solution. You need to look on how the gene worked with the others and how much resourced it used. Keep also in mind why evolution kept that gene. You might find our self with more issue than you had before. Gene therapy is , depending on the nations regulation , years…
  • @Cassox I DM you on this site, it seams the website has same problems, in the contact me page.
  • @Frank That is correct, the question is where to anchor the hardware. You don't want it to pull your skin. Or to slowly slide in a painful position.
  • I have done a lot of research on tDCS but I have never seen this tFUS. Are you sure about your sources? or how is supposed to work? Any papiers ? There are same good tDCS products you can look into, I can help there. I have no sponsor or kick backs , no worry.
  • Forum Username: Kuroro86 Location: Zug, Switzerland Skills: Agile methodology, Planning, Education/Certifications: Almost finished a bachelor in economics. Scrum Master. Linux fundamentals. Worked in a VR startup. Summary: I'm not very good in coding or languages. I'm good at guiding teams to makes sure they achieve the…
  • @Satur9 Well it is true that the power is small but we also only want to power up sensors and short range communication like Bluetooth. No need for a lot of power. Plus this ones are 40mm small we can put multiple one next to the other to generate more energy.
  • @Satur9 Do you have a peltier thermoelectric generator to suggest ?
  • I would try to ask it. They did it for Tiffany Cullern in the UK. Maybe is simply not known, but they should do it.
  • The skull replacement with a 3d printed version is not a new idea or experimental: https://threedmedprint.biomedcentral.com/articles/10.1186/s41205-021-00096-7 There is this case: https://www.medicaldesignandoutsourcing.com/depuy-synthes-3d-printed-implant-skull/ https://blogthinkbig.com/3d-printed-skull…
  • @Helenah If I understand correctly the papier the difference in temperature between the body temperatures "Internal applications take advantage of the gradients within the body between the core and the skin, generally 2-7'C," I do not believe you need that much temperature to get that distance. Especially if you are…
  • My suggestion is to put the implant under the breast an not in it. Hope you can see the picture. for same reason is under this comment. The second one is the shape used for surgical tubes. The can move around, but not too much. Could you upload the full papier from NASA ? The picture is to simply for me to understand what…
  • Interesting idea. The harvest of energy from the body, in my opinion , is a necessity for cyborgs. One question why under the arm pit ? there is a lot of moving parts down there that pull and push in all direction daily. I would put more in the center of the chest where there are bones to anchor. Or on top of the spinal…
  • You means something like this ? https://www.youtube.com/watch?v=9hu8MNuvCHE