Erischilde

About

Username
Erischilde
Joined
Visits
65
Last Active
Roles
Member
Badges
0

Comments

  • This stuff? https://www.amazon.ca/Aqua-Glow-Dark-Powder-Pigment/dp/B07562796K/ref=sr_1_1_sspa/139-7263433-4093400?ie=UTF8&qid=1519241369&sr=8-1-spons&keywords=glow-in-the-dark+powder&psc=1 I'm wondering what "non toxic" means. I hate/love the vaguery. They say glow sticks are "non toxic" and that shit melted the plastic…
  • @Birdhandz heeyy.. did some watching on prison tattoos. Small amount of shapoo or babyoil.. but like small.. and water, is a common mix. apparently the shampoo helps bind, the water then is the carrier. wife broke out the tattoo machines and has been getting ready to practice some more. i'm so torn on whether or not to try…
  • @Birdhandz you mean like a giant Firefly? That could be neat. Not sure how i feel about implanting a pen; when i was younger i took those kinds of risks. Now i'd want a little more info. polypropelene is good, but what if they poured lead in that factory ten years early, for example... Saying that though, would be amazing…
  • Iiiiiii spoke to a glass maker person. Said the heat would kill the magnet. Neo's currie is actually pretty low, like 310-350 C or something, with Boro metlting at 810C. If the magnet were maybe coated, THEN run through the induction coil, maybe. but as much as i'd love an induction coil/forge/magnetizer at home, no way…
  • @Birdhandz yeah good call on the thickness. I was thinking it would be hard without lots of glass work experience to try to coat anything without ending up with a thick blob. I have a slightly weird way i think i'm going to try this: i've seen in the past, glass blowerd for bongs/pipes working in Borosolicate, that…
  • @Birdhandz i gotchu. I'm curious about density of powder in glycerin. you'd have to really pack it in. I would have been stubborn with water.. for on skin is probably great with glycerin. for inskin, i'd add enough water that there's just a few mm of water above the level of the powder, and shake and dip for each reload.…
  • Actually got some news on that today. Got a contact from Master Bond with some suggested materials, and told me to call for half pint sizes on both a silicone and an epoxy! woot. Should i post their sales info?
  • @Birdhandz Gotcha. Why not use distilled water as a carrier? It's used all the time in cutting inks down...
  • oh i'm not buying. i just want it all lol
  • holy cow. never seen this sort of thing before... i'm amazed.. and i reallllllly want their 200 buck emergency kit with pullers.. and the anaesthetic kit is amazing!
  • We went a bit homedone, a bit bought. We bought the ink online, and offhand i don't know the brand but i can grab it at home sometime soon (buried in junk, just brought the tattoo equipment out of storage but haven't unpacked in some time). I should correct myself a bit, less than five years is accurate.. but less than 3…
  • @Cassox sorry slow reply, been working with mcstuff on the electronic parts actually. I'm looking at a project to make an led that powers by rfid. I know i've been beaten to the punch by Alex already, but my enthousiasm isn't dented yet. So basically some high shoreA silicone that will be enough to encapsulate some rfid…
  • This still going? I'm filling out a sheet shortly.
  • @Kraynyan sorry, late reply... i got so disappointed i gave up on getting a chip implant temporarily. I've tried two lock screen 3rd party apps, and they were garbage. One didn't work at all, the other created a second "lock screen", replacing the real one. So you'd have to disable the actual security on the phone, then…
  • sigh i wanna add a question. I know i've read this somewhere but don't remember where; if i'm getting neo magnets coated (professionally), do i want gold + rhodium? in that order? I know TiN PVD would be best, but i may have found gold+rhodium plating more accessible. Also, they are asking me what the base metal is.…
  • @cassox I'm totally in if you're still sending.
  • Technology is the tool. Grinding is the application. Is spraying concrete an idelogical act? I have to be optimistic and think that as we move ahead and access becomes more democratic, we will choose to move into a more sharing space than not. As with any other tool though, access will be easier for the rich and powerful;…
  • Well I have no science but I do have a glow in the dark tattoo. Irritation? No. Cancer in the future? Maybe. Worth it? Not right now... My tattoo faded in less than 5 years to nothing. Was cool for a bit but I don't think it's where it needs to be yet.
  • Oh geez, you're fairly close. I'm in Vancouver. What I don't suggest is buying online. Can't trust anything. Some legal supplements name themselves after popular steroids but are crap mixes of "natural" herbs and poppy cock, and of course you could get nothing, etc. In multiple cities I've had plenty of luck going on…
  • @Nova good call. thanks. i'll remember to cover up first before sanding... i was carving bone with a dremel recently; holy cow. the awful. the smell, the bone dust in my nose and eyebrows.. layers of ugh.probably a bunch of desicated brain too... (was a goat skull)
  • Yeeeep. Seeing this info. Checked out masterbond, then nusil; and you see the differences in recommendations; Nusil says no implant at USP VI, but Masterbond does. I've queried each of them, but i'm curious if they'll sell to me or even sell a small enough batch to use at home. I'm trying to source glass tubing like used…
  • @Newkiddo , where are you? i maybe get mine, locally from whatever people are selling. It's way easier to buy than to make, and way cheaper to buy, then have tested for purity, than to make. As for oral vs. injection: oral is fast acting, fast gone. It puts pressure on the liver (steroids specifically) and you do not want…
  • updoot as well: Thing has healed amazingly. It's visible now in dark evening light, not needed fulldark. Still hard to photo though. Seems i may never get to show it in pictures, just in person.
  • @Birdhandz did you ever play with USP6 silicone at all?
  • yep. i'm glad. this is going to be my source. now i want to find silicone! thanks!
  • https://www.atomadhesives.com/FDA-Grade-Food-Medical-Epoxy-Adhesives/FDA2T-Food-Safe-Medical-Grade-FDA-Adhesive Atom makes many different Epoxies.. MANY. so they have a section of "fda" adhesives, as well as potting.. so in this area, there are even still a number of options. If they sell direct, looks great, because they…
  • Thanks! @Birdhandz does it matter which one, or basically any epoxy is considered body friendly? @McSTUFF yeaaaahh.. i think test batch at least one or two, then as you said, buff. this would have to be small.
  • I'm 2 weeks into healing my V1 Firefly Tattoo implant. Breakdown of thoughts/review: A) Cyberise.me is just excellent for customer support/service and making you feel important. B) the included installation kit, went beyond what was needed, unexpectedly excellently thought out and appreciated. C) installation had ouch, of…